Horizon Plywood Inc. --  Hardwood Plywood  -- Hardwood Veneers --  Maple --  Cherry --  Mahogany --  Red Oak  --  Walnut --

 

 

Horizon Plywood data specification

 

I
Veneer cutting:
 -  Rotary Cut
-  Plain Sliced or Flat Cut
 
II
  Face and Back Veneer Thickness: (when cutting)
-1/32" ~ 0.7mm
- 1/50" ~ 0.5mm
- 1/64" ~ 0.4mm
 
III
Veneer matching:
 - Flat cut veneers  are Book Matched Piece Face.
- Rotary Cut are Whole Piece Face, otherwise specified.
 
IV
Basepanels substrate:
- Poplar
- Hardwood mix Veneer Core.
 
V
Glue:
In compliance with the ANSI/HPVA HP-1-1994 and EPA (TSCA) Rev 1997 .
- Low formaldehyde emission Glue (under 0.1 parts per million)
- E-1 GlueType 2 (formaldehyde content<1.5mg/L)
- E-1 GlueType 1 (formaldehyde content<5mg/L)
 
VI
Panel size standard:
  4' (1220mm) x  8'(2440mm)
 
VII
PRE-FINISH PLYWOOD
  For Pre-finish plywood specifications (click here)
 

 

HORIZON PLYWOOD MSDS (click here to download)
For Pre-finish plywood specifications (click here)

 

Dimensions and weight chart (approximate):

 Hardwood Plywood
Dimensions Ply Pieces / Unit Weight / Unit
1 / 4"(5.5mm) x 4' (1220mm) x  8'(2440mm) 5 90 - 100 1985 - 2205 lbs
1 / 2" (12mm) x 4' (1220mm) x  8'(2440mm) 7 40 - 75 2043 - 3700 lbs
5 / 8" (15mm) x 4' (1220mm) x  8'(2440mm) 11 60 3106 lbs
3 / 4" (18mm) x 4' (1220mm) x  8'(2440mm) 13 50 3333 lbs

 

Previous

 

Horizon Plywood. Tel. 305 887 0702 Fax. 305 887 0704

9710 NW 110th AVE, Suite 6, Miami, FL. 33178